Binker Coal Bin Rotary Clog Clearing Machine Bloking Machine
Performance Features
1. The rotation of the warehouse body breaks the balance formed
when the materials are arching;
2. Easy to block section installed in the lower mouth of coal
bunker, the blocking clearance effect of this section is 99.9%;
3. Change the flow state inside the whole warehouse to turn the
flow state into the whole flow, and the probability of arching on
the upper part of the warehouse is greatly reduced;
4. Realize remote and field control conversion. It can control the
action manually, and also can realize regular start and stop.
5. The sealing design adopts mature labyrinth technology and
sealing pre-pressure compensation design, without leakage,
organizing dust overflow and improving working environment;
6. The warehouse body is installed by hanging type. Gravity is
applied to the lifting arm, and filler is added to the sealing
mouth to ensure that the sealing mouth is not easily damaged;
7. The warehouse body adopts 16Mn steel material of 12mm, which
meets the site requirements;
8. The bin body is installed with ball type positioning ring, which
makes the clog clearing equipment more stable during operation.
Performance of rotary original coal bunker clogging cleaner
1. Rotary cutting tool and rotary taper pipe constitute spiral
forced feeding system, which fundamentally solves the problem of
coal plugging;
2. Change the flow state of coal, make the flow state of coal in
the bunker change from the center to the whole flow, and reduce the
probability of arching on the upper part of the bunker;
3. Easy plugging section installed in the lower mouth of coal
bunker, which has outstanding blocking clearance effect;
4. Realize remote and local control conversion. It can control the
action manually, and also can realize regular start and stop.
5. The seal design adopts the integral axial labyrinth groove seal
to avoid leakage and improve the working environment;
6. Rotary cutter is manufactured by special process and welded with
high strength.
Main technical parameters of rotary original coal bunker clearance
machine
1. Rotary cutter material: 2Cr13 stainless steel
2. Rated torque: 31.7Kn.m
3. Rated speed: 0.77r/min
4. Clearance height: 2280mm
5. Machine size :1755×1400×2340mm
6. Weight of blocking cleaner: 2.8t
7. Drive large tooth ring material: ZG45 cast steel
8. Material of rotating bin: 12mm,16Mn steel plate
9. Rated power: 4KW
10. Rated voltage: 380V
11. Rated axial dynamic load: 30T
12. Control form: manual and automatic
13. suitable coal feeder into the outlet diameter: 1240 mm, 640 mm
Φ Φ
Scope of application
1. thermal power plant, heating company's original coal bunker
2. cement factory material bin, original coal bin
3. Chemical plant original coal bunker
4. steel plant, coking plant coal warehouse, raw material warehouse
